#1 2022-03-26 18:51:14

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

THttpClientSocket with Basic authentication returns empty content

var u: TUri; 
    h:THttpClientSocket; 
    i:integer;
begin 
h:=THttpClientSocket.Create; 
u.From('https://user:pass@url');
h.Open(u.Server, u.Port, nlTcp, 10000, u.Https);
i:=h.Get(u.Address,0,'Authorization: Basic '+u.UserPasswordBase64);  //tested also: i:=h.Get(u.Address,0,'Authorization: Basic '+u.UserPasswordBase64+#13+#10);

Response code with correct user/name password is 200 and h.http.content is empty (h.Http.ContentType is returned correct)
using no authentication or with wrong password response code is 401 and h.http.content is OK
calling h.GetBody does not help
Any ideas?

Offline

#2 2022-03-27 09:27:07

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

trying to debug it I found that probably it is not related to basic authentication
headers are parsed ok but  Http.ContentLength is -1 and that causes the body not to be parsed
The same url works ok with Twinhttp from mormot

Last edited by dcoun (2022-03-27 09:28:06)

Offline

#3 2022-03-28 06:45:20

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,552
Website

Re: THttpClientSocket with Basic authentication returns empty content

I am not able to reproduce it.

Could you see why Http.ContentLength is not filled for your particular URL?
What are the HTTP headers returned by the server?

Offline

#4 2022-03-28 09:26:15

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

I sent you a message about

Offline

#5 2022-03-28 09:55:36

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,552
Website

Re: THttpClientSocket with Basic authentication returns empty content

There is a redirection from this page, I think.

So what you receive is the 302 code, with an empty body, so Http.ContentLength is not set - as expected.

Offline

#6 2022-03-28 09:58:18

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

I think the result code was 200 and not 302

Offline

#7 2022-03-28 14:04:45

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,552
Website

Re: THttpClientSocket with Basic authentication returns empty content

Nope. The result is 301.

So you need to set

  h.RedirectMax := 10;

before the request to enable redirection.

Then we got a 200 response, but with no chunked encoding flag, nor content-length.
https://www.rfc-editor.org/rfc/rfc7230#section-3.3.3 states it should read all data until the server closes the connection.
This is a pretty inefficient way of handling the content size, and void the whole HTTP/1.1 interrest - this server is awfully coded for sure, and react as a HTTP/1.0 server.

Previous version was only reading till the connection close with HTTP/1.0 - now I have enabled it for HTTP/1.1 also.
See https://github.com/synopse/mORMot2/commit/ddb7c8d4

Offline

#8 2022-03-28 14:25:04

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

Thank you a lot Arnaud.
Probably, I did not noticed the redirect as I always set it automatically.
I am not sure for many about this Java server as I am not responsible for it. I can not be sure if it is due to the webserver or the firewall and authentication system that exists between.
I can assure you that all the Big and well Known company names exist between my request and this Java web server (including this O-Java server, I mentioned no names ).
Thanks again.

PS I have sent you an other gist about fpc and today's RTTI update in github did not change it. Thank you in advance.

Offline

#9 2022-03-28 14:30:24

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,552
Website

Re: THttpClientSocket with Basic authentication returns empty content

I don't know what occurs with your RTTI problem.
I have no issue compiling the regression tests on Win32 with FPC, and run them.
Could you also compile the regression tests?

Offline

#10 2022-03-28 14:57:50

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

I have only the following in 1.2 Core process:

! Core process - TDocVariant
! Exception ESynVariant raised with messsage:
!  TDocVariant.DispInvoke: invalid (1) call
  - TDecimal128: 17,446 assertions passed  4.41ms
! Core process - BSON
! Exception EVariantInvalidOpError raised with messsage:
!  Invalid variant operation

an accepted in SynDBRemote as I am not running it as admin
and the following:

3.3. Bidirectional remote connection:
  - Websockets protocols: 30,000 assertions passed  18.66ms
  - Run http server: 2 assertions passed  37.99ms
!  - Soa callback on server side: 2,646 / 4,580 FAILED  8.81ms
!  - Soa callback via json websockets: 3,969 / 6,898 FAILED  354.72ms
!  - Soa callback via binary websockets: 3,969 / 6,898 FAILED  423.36ms
  - Relay start: 4 assertions passed  34.62ms
!  - Relay soa callback via json websockets: 3,969 / 6,899 FAILED  1.22s
  - Relay connection recreate: 1 assertion passed  50.94ms
!  - Relay soa callback via binary websockets: 3,969 / 6,899 FAILED  1.33s
  - Relay shutdown: 2 assertions passed  279.34ms
  - TRecordVersion: 20,068 assertions passed  187.54ms
  Total failed: 18,522 / 82,251  - Bidirectional remote connection FAILED  3.97s

Offline

#11 2022-03-28 15:49:00

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

Compiling the same source for linux I am getting the following for debug mode:

An unhandled exception occurred at $000000000053BA7F:
EAccessViolation: Access violation
  $000000000053BA7F  REDIRECTCODE,  line 4141 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.os.pas
  $000000000058A79E  REDIRECTRTLCALL,  line 1144 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.rtti.fpc.inc
  $000000000059D2DA  INITIALIZEUNIT,  line 8882 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.rtti.pas
  $000000000059D329  MORMOT.CORE.RTTI_$$_init$,  line 8910 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.rtti.pas
  $000000000041A44C

and the following for release more

An unhandled exception occurred at $00000000006B7387:
EHttpSocket: MainHttpClass: No THttpRequest class known!
  $00000000006B7387

Should I try FPC 2.2 with fixes?

Offline

#12 2022-03-29 08:08:22

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,552
Website

Re: THttpClientSocket with Basic authentication returns empty content

Sounds pretty weird, since I don't have troubles with FPC 3.2.0 here, and FPC 3.2.2 was reported to work as expected a few months ago, IIRC (alfred?).

You seem to confuse the Lazarus version (2.2) and the FPC version (3.2.x) - this is the later which matters.

So perhaps try the FPC 3.2.2 with fixes branch.
FPC 3.2.0 should work directly.
And ensure you have the latest mORMot 2 source.

Offline

#13 2022-03-29 09:16:16

AOG
Member
Registered: 2014-02-24
Posts: 490

Re: THttpClientSocket with Basic authentication returns empty content

Few minutes ago, I installed FPC fixes with Lazarus fixes through fpcupdeluxe on a win11 pc.
Also installed latest mORMot2 sources with fpcupdeluxe.
Result: all greens on win32 mormot2tests !

Offline

#14 2022-03-29 09:57:04

pvn0
Member
From: Slovenia
Registered: 2018-02-12
Posts: 210

Re: THttpClientSocket with Basic authentication returns empty content

maybe his lib paths are wrong and is compiling/linking older version. Check your paths and do a full clean+build.

Offline

#15 2022-03-29 12:03:02

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

New laptop i7-1165G7 32GB ram running Windows 11 pro 21H2 22000.556
I deleted old FPCupdeluxe directory.
Github downloaded version 2.0.116 with Github Desktop. NO other version exists in this new PC
fpcupdeluxe-i386-win32.exe downloaded from Pre-release v2.2.0i of fpcupdeluxe. Just clicked the Install/update FPC+Laz button
fpcupdeluxe: info: FPCNativeInstaller (GetModule: FPC): FPC was at revision/hash: FRET_UNKNOWN_REVISION
fpcupdeluxe: info: FPCNativeInstaller (GetModule: FPC): FPC is now at revision/hash: release_3_2_2-0-g0d122c4953
Running TotalCommander searching for '*mormot*' in fpc+Laz dir Nothing found
Lazarus 2.2.0 (rev lazarus_2_2_0-0-g4d49533f10) FPC 3.2.2 i386-win32-win32/win64
Package Mormot v2.0.1 "recompile clean" + Recompile All required
Mormot2tests clean up and build
results:
! Core process - TDocVariant
! Exception ESynVariant raised with messsage:
!  TDocVariant.DispInvoke: invalid (1) call
  - TDecimal128: 17,446 assertions passed  4.48ms
! Core process - BSON
! Exception EVariantInvalidOpError raised with messsage:
!  Invalid variant operation

3.3. Bidirectional remote connection:
  - Websockets protocols: 30,000 assertions passed  18.75ms
  - Run http server: 2 assertions passed  40.16ms
!  - Soa callback on server side: 2,646 / 4,580 FAILED  10.19ms
!  - Soa callback via json websockets: 3,969 / 6,898 FAILED  444.18ms
!  - Soa callback via binary websockets: 3,969 / 6,898 FAILED  398.09ms
  - Relay start: 4 assertions passed  35.80ms
!  - Relay soa callback via json websockets: 3,969 / 6,899 FAILED  1.27s
  - Relay connection recreate: 1 assertion passed  64.81ms
!  - Relay soa callback via binary websockets: 3,969 / 6,899 FAILED  1.39s
  - Relay shutdown: 2 assertions passed  297.95ms
  - TRecordVersion: 20,068 assertions passed  173.88ms
  Total failed: 18,522 / 82,251  - Bidirectional remote connection FAILED  4.18s

Alfred the download/install of fpc was done 25-30min ago for your logs
Any help is welcomed. I do not want to consume anyone's time.

Offline

#16 2022-03-29 12:16:53

AOG
Member
Registered: 2014-02-24
Posts: 490

Re: THttpClientSocket with Basic authentication returns empty content

Don't worry. You are not wasting anybody's time.
You gave good info. Except for the manner in which you installed the mORMot2.
So, how did you install mORMot2 ?
With this info, I will try to reproduce your issue.

Offline

#17 2022-03-29 12:42:01

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

Returned to my old laptop (same brand Siemens) i7-6500U 16GB ram Win10 20H2 19042.906
Lazarus 2.2.0 (rev lazarus_2_2_0-7-gb938b1d561) FPC 3.2.3 i386-win32-win32/win64
Save version of mormot2 from Github upgraded today
Tests passed - all green

Mormot is installed as the following:
Packages ->Open package file -> Selected \mORMot2\packages\lazarus\mormot2.lpk -> Compile, more-recompile clean, more-recompile all required

I am starting a memory test on the laptop, but I do not believe a memory problem exists in a problems that it is reproduced exactly the same.
For FPC bug seems, it does not like my CPU?

Offline

#18 2022-03-29 12:48:04

AOG
Member
Registered: 2014-02-24
Posts: 490

Re: THttpClientSocket with Basic authentication returns empty content

Ok. Thanks.
Problem reproduced. Its FPC 3.2.2 itself, so current stable gives this error. FPC 3.2.3 (as per fixes on your laptop) gives all greens.

Offline

#19 2022-03-29 12:52:15

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

Upgraded the new laptop to Lazarus 2.2.0 (rev lazarus_2_2_0-122-gb464aafe69) FPC 3.2.3 i386-win32-win32/win64 3.2.3-609-gd9ac2f58ad

Now I have only the following RED in the test:
! External database - SynDBRemote
! Exception ESqlDBRemote raised with messsage:
!  TSqlDBServerHttpApi.Create: administrator rights needed to register URI root on port 888

As administrator it gives them all green.

Last edited by dcoun (2022-03-29 13:26:44)

Offline

#20 2022-03-29 13:29:32

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

Thank you. finally mormot2tests  is green as administrator with last fpc version with fixes.

My initial problem still exists with this fpc version too, but I will rewrite the project adding Torm classes to see which can reproduce the problem
if you have any more suggestions, please tell me.
Thank you very much again

An unhandled exception occurred at $006C5CFA:
EInvalidCast: Invalid type cast
  $006C5CFA  SETPARSERTYPE,  line 9670 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.json.pas
  $004DC185  CREATE,  line 7330 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.rtti.pas
  $004DDB11  DOREGISTER,  line 8104 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.rtti.pas
  $004DDBE2  DOREGISTER,  line 8118 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.rtti.pas
  $004DEC4D  NEWINSTANCE,  line 8650 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.rtti.pas
  $004C779B  CREATEEX,  line 4382 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.data.pas
  $006CCBE9  GLOBALCRYPTALGOINIT,  line 4284 of ../../../../../Delphi/G/mORMot2/src/crypt/mormot.crypt.secure.pas
  $006CA516  IMPLEMENTS,  line 3305 of ../../../../../Delphi/G/mORMot2/src/crypt/mormot.crypt.secure.pas
  $00750A8D  INITIALIZEUNIT,  line 5338 of ../../../../../Delphi/G/mORMot2/src/crypt/mormot.crypt.ecc.pas
  $00750B68  MORMOT.CRYPT.ECC_$$_init$,  line 5345 of ../../../../../Delphi/G/mORMot2/src/crypt/mormot.crypt.ecc.pas
  $0040F064

Offline

#21 2022-03-30 07:56:15

AOG
Member
Registered: 2014-02-24
Posts: 490

Re: THttpClientSocket with Basic authentication returns empty content

Just for your info. The bug-report related to this FPC 3.2.2 issue. Conclusion: FPC 3.2.2 is not suited for the mORMot[2] due to this bugger.
https://gitlab.com/freepascal.org/fpc/s … sues/39438

Offline

#22 2022-03-30 20:31:35

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

dcoun wrote:
An unhandled exception occurred at $006C5CFA:
EInvalidCast: Invalid type cast
  $006C5CFA  SETPARSERTYPE,  line 9670 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.json.pas
  $004DC185  CREATE,  line 7330 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.rtti.pas
  $004DDB11  DOREGISTER,  line 8104 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.rtti.pas
  $004DDBE2  DOREGISTER,  line 8118 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.rtti.pas
  $004DEC4D  NEWINSTANCE,  line 8650 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.rtti.pas
  $004C779B  CREATEEX,  line 4382 of ../../../../../Delphi/G/mORMot2/src/core/mormot.core.data.pas
  $006CCBE9  GLOBALCRYPTALGOINIT,  line 4284 of ../../../../../Delphi/G/mORMot2/src/crypt/mormot.crypt.secure.pas
  $006CA516  IMPLEMENTS,  line 3305 of ../../../../../Delphi/G/mORMot2/src/crypt/mormot.crypt.secure.pas
  $00750A8D  INITIALIZEUNIT,  line 5338 of ../../../../../Delphi/G/mORMot2/src/crypt/mormot.crypt.ecc.pas
  $00750B68  MORMOT.CRYPT.ECC_$$_init$,  line 5345 of ../../../../../Delphi/G/mORMot2/src/crypt/mormot.crypt.ecc.pas
  $0040F064

Trying to debug the above in function
function TRttiJson.SetParserType(aParser: TRttiParserType;  aParserComplex: TRttiParserComplexType): TRttiCustom; 
The class the error happens in processing class TRawUtf8List as it arrives to its ancestor class TObjectWithCustomCreate in line 9670

        n := Props.Count;
        TCCHookClass(fValueClass).RttiCustomSetParser(self);      

In the above before crashing the fValueClass is TCLASS($00923B70)  in the debugger and (fValueClass)^  is __vtbl_ptr_type

Offline

#23 2022-03-31 07:38:27

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,552
Website

Re: THttpClientSocket with Basic authentication returns empty content

Perhaps the class hooking does not work on this FPC revision.

Please try https://github.com/synopse/mORMot2/commit/aa341c64

Offline

#24 2022-03-31 15:08:43

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

ab wrote:

Perhaps the class hooking does not work on this FPC revision.

Please try https://github.com/synopse/mORMot2/commit/aa341c64

Thanks a lot @ab, I passed this problem

I noticed that after that I had a forgotten testing Tormclass (just defined and included in the Tmodel, no action on it in my software) with the following definition:

  TOrmApicities=class(Torm)
    private
      Fnam:string;
      Fnomosid:TID;
      Fact:boolean;
    published
      property nam:string index 250 read Fnam write Fnam;
      property nomosid:TID read Fnomosid write Fnomosid;
      property act:boolean read Fact write Fact;
  end;                                        

In Delphi, no error, no problem. In FPC 3.2.3 I am using now, I got an 219 runerror error during Tmodel.create in file mormot.orm.core line 9389
The problem was the TID that was not following the documentation in mormot.orm.core line 154 to have a type definition to the Torm it belongs.
I write it down as a difference in cross compiling the same code between Delphi and FPC.
Edit: The above is not a problem for me. Forget it


The problem is the now the following:
After that (only in FPC) I am getting an invalid typecast in file mormot.core.interfaces line 5349

  p := pointer(TRttiCustomWrapper(rtti).fAutoCreateInterfaces);   

when defining an interface service

srvdb.ServiceDefine(TwbService,[IwbService],sicPerThread).ByPassAuthentication:=true;

for the following interface:

 
  TwbService = class(TInjectableObjectRest, IwbService)
  private
  protected
    fTotalWorkCount: Integer;
  public
    procedure StartWork(const PrID: Integer; const onFinish: IwbCallback);
    function TotalWorkCount: Integer;
    function incDBver(const db,wid: integer):int64;
end;

initialization
GlobalInterfaceResolver.add(TypeInfo(IwbService),TwbService);               

Any help welcome. Thank you in advance

Last edited by dcoun (2022-03-31 19:45:06)

Offline

#25 2022-03-31 19:26:39

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,552
Website

Re: THttpClientSocket with Basic authentication returns empty content

About TOrmApicities, I am sorry but I don't understand the problem you had.

Forget about 3.2.3: it seems they forced runtime class type checking when class types are forced...
So TRttiCustomWrapper(rtti) is checked so that rtti is indeed a TRttiCustomWrapper - which is not the case, but it is fine because we just need to access a protected property.
Pretty weird and compatibility breaking for sure.

Offline

#26 2022-03-31 19:41:32

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

ab wrote:

About TOrmApicities, I am sorry but I don't understand the problem you had.

The Fnomosid in the class was declared as TID. I changed it to Prtint and it works OK. In the documentation I read that I should not use a TID directly. I should have a "type TormtableID=TID" where the Tormtable is the orm class that has the TID and then declare the Fnomosid as TormtableID. But anyway, that is not a problem for me. I do not use joined orm classes. Mormot is so flexible that I do not needed it.

ab wrote:

Forget about 3.2.3: it seems they forced runtime class type checking when class types are forced...
So TRttiCustomWrapper(rtti) is checked so that rtti is indeed a TRttiCustomWrapper - which is not the case, but it is fine because we just need to access a protected property.
Pretty weird and compatibility breaking for sure.

What means forget about 3.2.3. I can not compile it using 3.2 stable as you saw.
And now I can not define a service interface as you can see.
All the problems are with FPC. In Delphi 11.1 everything works as expected but I have prof edition.
I need a Linux x86-64 and arm64 mormot services, that it is the reason I am spending time to achieve FPC compilation.
What do you propose? How can I overcome it?

Last edited by dcoun (2022-03-31 19:43:01)

Offline

#27 2022-03-31 20:31:13

tbo
Member
Registered: 2015-04-20
Posts: 349

Re: THttpClientSocket with Basic authentication returns empty content

dcoun wrote:

What do you propose? How can I overcome it?

Use the same system that Arnaud uses in production.
Setup your dedicated FPC / Lazarus environment with fpcupdeluxe

With best regards
Thomas

Offline

#28 2022-03-31 20:41:13

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

I have just done that: Return to FPC 3.2.0 and I have the same above problem with defining the service
Lazarus 2.2.0 (rev lazarus_2_2_0-122-gb464aafe69) FPC 3.2.0 i386-win32-win32/win64
I am having Free Pascal Compiler version 3.2.0-r47409 [2022/03/31] for i386
Which version of FPCupdeluxe installs FPC SVN 45643 (3.2.0)?

Am I missing something else?

Last edited by dcoun (2022-03-31 20:43:49)

Offline

#29 2022-03-31 21:41:50

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

I have managed to force fpcupdeluxe to install Free Pascal Compiler version 3.2.0-r45643 [2022/04/01] for i386
package mormot2 again with clean and build
now the mormot2tests have one RED in 1.2 core process:
!  - Encode decode JSON: 1 / 431,822 FAILED  385.27ms
clean and build my project and the above error in mormot.core.interfaces line 5349 still exists

I Reverted mormot2 to 3cd541a9 ... now I have the above error in:
TCCHookClass(fValueClass).RttiCustomSetParser(self);

Last edited by dcoun (2022-03-31 21:46:28)

Offline

#30 2022-04-01 05:54:44

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

After some hours of sleep I think I understood my mistake.
I will re-evaluate FPC when mormot2 will be officially available. I will find my way till that happens.
I learn a lot of things the last days, many thanks for help and your time, and I apologize for my ignorance.
Now the time is very limited and I have to catch all waiting for me to finish.
Have a nice month and be careful for le poisson d' Avril.

Offline

#31 2022-04-01 06:32:11

pvn0
Member
From: Slovenia
Registered: 2018-02-12
Posts: 210

Re: THttpClientSocket with Basic authentication returns empty content

dcoun wrote:

I have managed to force fpcupdeluxe to install Free Pascal Compiler version 3.2.0-r45643 [2022/04/01] for i386

Not sure where you got that date from but 3.2.0 was released in 2020. Honestly if you're having issues just download 3.2.0 from offical freepascal webpage.

Offline

#32 2022-04-01 06:39:23

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

pvn0 wrote:
dcoun wrote:

I have managed to force fpcupdeluxe to install Free Pascal Compiler version 3.2.0-r45643 [2022/04/01] for i386

Not sure where you got that date from but 3.2.0 was released in 2020. Honestly if you're having issues just download 3.2.0 from offical freepascal webpage.

I copied the first line in logs from Lazarus while compiling.
It gives the complete version of FPC that is is used and the today's date.

how I managed to do that:
I deleted old fpcupdeluxe directory with lazarus and fpc. I re-run the fpcupdeluxe executable. From fpcupdeluxe-> Setup+ -> up-right in the dialog you can enter the SVN you like to be installed

Offline

#33 2022-04-01 08:30:50

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,552
Website

Re: THttpClientSocket with Basic authentication returns empty content

Something is definitively wrong with your setup, I am afraid... or did you change the project options, or the mORMot source (e.g. changed mormot.defines.inc conditionals)?

Offline

#34 2022-04-01 08:45:59

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

ab wrote:

Something is definitively wrong with your setup, I am afraid... or did you change the project options, or the mORMot source (e.g. changed mormot.defines.inc conditionals)?

@ab I have the 3.2.0-r45643 you mention in the documentation and it does not pass the mormot2 tests. Which revision are you currently using? I can test it if a revision works for sure with mormot2
Github desktop does not show me any changed file. I will deleted the mormot2 directory and I will give it a try after downloading it again with Github
I have sent to you in the last gist my projects' options in Lazarus for compiling but please forget my project's compile and use your time to finish mormot2.
For my development needs for the moment I have Delphi and I will try to use wineconsole for small cases that need Linux. It is not efficient but it will help while waiting.
Thank you again. And I apologize for the trouble.

Offline

#35 2022-04-01 08:57:50

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,552
Website

Re: THttpClientSocket with Basic authentication returns empty content

@dcount
No trouble. It is just a weird behavior in your computer...

I have asked
https://forum.lazarus.freepascal.org/in … 942.0.html
and
https://forum.lazarus.freepascal.org/in … 944.0.html

Offline

#36 2022-04-01 14:15:52

dcoun
Member
From: Crete, Greece
Registered: 2020-02-18
Posts: 416

Re: THttpClientSocket with Basic authentication returns empty content

I can confirm that all the trouble was caused by the -CR switch in the debug mode.
I should check again the meaning of "Debug" in the dictionary
You had right.

Last edited by dcoun (2022-04-01 14:18:33)

Offline

Board footer

Powered by FluxBB