#1 2014-06-10 09:15:35

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,612
Website

MVC URI routing

Here is a transcription of today's mails.

Mail wrote:

hello Doug,

Nice idea!
I wanted to do something like this.
There are already some feature request tickets for it.
See http://synopse.info/fossil/tktview?name=bd94c11ab1

Some comments:
- why use {parametername} and not $parametername ?
if identifiers are plain alphanumerics, we may safely write 'customers/$customerid' or 'customers/$customerid/invoices/$invoicenumber'
- why use classes for DTO, and not record/dynamic arrays? Or why re-implement a TList by hand, as there is TCollection working great, even with pre-generic versions of Delphi?
- the best to add routing may be to add it in a way transversal to TSQLRestServerURIContext, in a new dedicated method - something like ExecuteSOAByInterfaceRouting
- RegisterUriTemplate() could be a good idea - and I would like to add method attributes for newer versions of Delphi: could be pretty convenient, in this case (I do not like much attributes for ORM, since it mixes database specifications and high level code, but it does make sense for routing).

I will took a look at it.

Thanks a lot for sharing!

---
Arnaud Bouchez
http://synopse.info

Le 2014-06-10 09:06, Doug Billi a écrit :
> Arnaud,
>
> I'm working on a URI router that can map individual URIs to interfaces
> via templates.
>
> For example:
>
> Templates.Register('customers/{CustomerId}');
>
> Templates.Register('customers/{CustomerId}/invoices/{InvoiceNumber}');
>
>
> Templates.Register('invoices/{InvoiceNumber}');
>
> if Templates.FindMatch('customers/1234/invoices/5678',
> MatchedTemplate, Params) then
>
>  Writeln('Match Found')
>
> else
>
>  Writeln('NOT Found');
>
> The code is working (you can see it in URITEMPLATETEST.DPR).
>
> If there is a match on a template, the URI parameters will be
> extracted into JSON, for invocation of the method:
>
> [{"CustomerId":"1234"}, {"InvoiceNumber":"5678"}]
>
> I will also plan to extract parameters after the ?, but it would be
> necessary to extract them in the correct order, as is done in
> TSQLRestRoutingREST.ExecuteSOAByInterface(). But in order to do that,
> I'll need to associate the template with the correct interfaces.
>
> I was thinking of something like this:
>
> procedure RegisterUriTemplate(const aTemplate: RawUTF8;
> aImplementationClass: TInterfacedClass; aInterface: PTypeInfo;
> aMethod: TSQLURIMethod);
>
> It would be preferable to separate the templates for each service, so
> for the following services, something like this:
>
> // CustomersApi Service
>
> RegisterUriTemplate('customers/{CustomerId}', TCustomersApi,
> ICustomersApi.GetCustomer, mGET);
>
> RegisterUriTemplate('customers/{CustomerId}', TCustomersApi,
> ICustomersApi.CreateCustomer, mPOST);
>
> RegisterUriTemplate('customers/{CustomerId}', TCustomersApi,
> ICustomersApi.DeleteCustomer, mDELETE);
>
> RegisterUriTemplate('customers/{CustomerId}/invoices/{InvoiceNumber}',
> TCustomersApi, ICustomersApi.GetCustomerInvoice, mGET);
>
> // InvoicesApi Service
>
> RegisterUriTemplate('invoices/{InvoiceNumber}', TInvoicesApi,
> IInvoicesApi.GetInvoice, mGET);
>
> RegisterUriTemplate('invoices/{InvoiceNumber}', TInvoicesApi,
> IInvoicesApi.CreateInvoice, mPOST);
>
> RegisterUriTemplate('invoices', TInvoicesApi,
> IInvoicesApi.GetInvoices, mGET);
>
> However, I'm not sure how to best integrate it with mORMot, or even if
> this is the best approach.
>
> I've created a unit called RESTAPISERVERURICONTEXT.PAS, with a class
> that descends from TSQLRestServerURIContext to allow me to override
> URIDecodeSOAByInterface() and ExecuteSOAByInterface(), but I'm not
> sure where to do it. Perhaps this should be even be done earlier in
> the code?
>
> Of course, I want to retain the existing functionality for native
> Delphi clients in the same application, but the URL mapping is to
> provide an alternative way to access the methods from AJAX clients.
>
> The web service API I'm writing will need the URL conventions provided
> by the templates.
>
> So there are three issues:
>
> 1) Where to register the templates to map to the service interfaces.
>
> 2) Where to perform the lookup and execute the matched method.
>
> 3) Do this in a way that doesn't prevent a native Delphi client from
> calling the same services using the existing architecture.
>
> Do you have any suggestions for the correct way to integrate this
> template mapping feature?
>
> I've included two demo applications, one to test the URI templates
> (URITEMPLATETEST.DPR) and another (DEMOHTTPSERVER.DPR), which
> showcases how to implement multiple SOA services in a multi-threaded
> way (using sicPerThread). Everything was coded to make the demo easy
> to understand (it even includes pre-allocating the Data Access Layer
> class for each thread instance).
>
> Once I get the template code working, I think it would be a great
> example to include with mORMot to show how interface based services
> can be used in existing applications that haven't yet migrated to ORM.
> Honestly, I've searched high and low and there is nothing else out
> there that comes close to what mORMot provides. I want to see it
> become the de-facto web service framework for Delphi! At some point,
> it could implement attributes like WCF 4 to annotate the service
> methods with URI templates, but that's for another day. ;-)
>
> Of course, if you have any constructive feedback on how the demo
> works, please let me know.
>
> I could have posted this to the forum, but I thought it would be
> better to email you the sample code. However, I can always post there
> if you'd prefer.
>
> Thanks,
>
> Doug

Offline

#2 2014-06-10 09:37:25

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,612
Website

Re: MVC URI routing

But, perhaps we may use "convention over configuration" pattern.

For instance, instead of
  GET 'customers'
  GET 'customers/{CustomerId}'
  GET 'customers/{CustomerId}/invoices/{InvoiceNumber}'
  DELETE 'customers/{CustomerId}'
  POST 'customers'
  POST 'customers/{CustomerId}/invoices'
we may define a method as such:

ICustomers = interface
  // for GET 'customers' 
  function get_: TServiceCustomAnswer;
  // for GET 'customers/{CustomerId}' 
  function get_(CustomerID: integer): TServiceCustomAnswer;
  // for GET 'customers/{CustomerId}/invoices/{InvoiceNumber}'
  function get_invoices(CustomerID: integer; const InvoiceNumber: RawUTF8): TServiceCustomAnswer;
  // for DELETE 'customers/{CustomerId}' 
  function delete_(CustomerID: integer): TServiceCustomAnswer;
  // for POST 'customers' 
  function post_(const Body: RawByteString): TServiceCustomAnswer;
  // for POST 'customers/{CustomerId}/invoices' 
  function post_invoices(CustomerID: integer; const Body: RawByteString): TServiceCustomAnswer;
end;

We may add some methods to TServiceCustomAnswer, to easily return any content.

We may allow to define a Ctxt: TSQLRestServerURIContext input parameter to let the method directly access all input content, in addition to Body: RawByteString.

Thanks to these patterns, you do not need to write any routing by hand.
We may add a dedicated method for custom routing - but would it be necessary?

BTW, for MVC implementation, I like very much the http://web2py.com/books/default/chapter/29/03/overview patterns.
This is much more than URI routing.

What do you think?

Offline

#3 2014-06-10 17:05:10

avista
Member
Registered: 2014-01-06
Posts: 63

Re: MVC URI routing

Nice!  I like the "convention over configuration" idea.

Just so I understand, the following examples would work?

// for GET 'customers/{CustomerId}/invoices/{InvoiceNumber}/orders/{OrderNumber}'
function get_invoices_orders(CustomerID: integer; const InvoiceNumber, OrderNumber: RawUTF8): TServiceCustomAnswer;

// for GET 'customers/{CustomerId}/reports/orders/active'
function get_reports_orders_active(CustomerID: integer): TServiceCustomAnswer;

But this seems problematic:

// for GET 'customers/{CustomerId}/reports/orders/{OrderNumber}/details'
function get_reports_orders_details(CustomerID: integer; OrderNumber: RawUTF8): TServiceCustomAnswer;

Because the convention would expect:

'customers/{CustomerId}/reports/{OrderNumber}/orders/details'

instead of:

'customers/{CustomerId}/reports/orders/{OrderNumber}/details'

Which is what method attributes could solve.

And what about '?' parameters, as they will be necessary from some operations?

// for GET 'customers/{CustomerId}/reports/orders?$Filter=Price.gt.100&$OrderBy=OrderDate'
function get_reports_orders(CustomerID: integer; Filter, OrderBy: RawUTF8): TServiceCustomAnswer;

Of course, this would run into the same problems with the 'Filter' expected after the 'reports/'.

In any case, I think it would be important to have the method signature parameters after the '?' optional (if they aren't present in the method signature), because they are typically dynamic:

// for GET 'customers/{CustomerId}/reports/orders?$Filter=Price.gt.100&$OrderBy=OrderDate'
function get_reports_orders(CustomerID: integer): TServiceCustomAnswer;
var
  Filter, OrderBy: RawUTF8;
begin
  Filter := Ctxt.Input['Filter'];
  OrderBy := Ctx.Input['OrderBy'];
end;

So if the parameters after the '?' are present in the method signature, then they are passed as arguments, otherwise they can be accessed via the Ctxt object (notwithstanding the problems mentioned above).

We may allow to define a Ctxt: TSQLRestServerURIContext input parameter to let the method directly access all input content, in addition to Body: RawByteString.

Having the option to specify a Ctxt parameter is a great idea, as above to be used for '?' parameters.  I assume this would be an optional parameter?

With:

function get_reports_orders(Ctxt: TSQLRestServerURIContext; CustomerID: integer): TServiceCustomAnswer;

Without:

function get_reports_orders(CustomerID: integer): TServiceCustomAnswer;

Additional thoughts?

Offline

#4 2014-06-10 19:29:21

Junior/RO
Member
Registered: 2011-05-13
Posts: 210

Re: MVC URI routing

The solution is routing like Ruby on Rails does, using regular expressions:

http://guides.rubyonrails.org/routing.html

Offline

#5 2014-06-10 19:47:33

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,612
Website

Re: MVC URI routing

For true MVC, routing should be IMHO automated for almost 95% of the process.
This is what our feature request proposed.
In short, the routing should better be hidden to the coder.

I think that routing is an implementation detail.
Only for consumption by or of third-party components, we may have to set a custom route.

I still can't understand why we have to set the route by hand in MVC.

In mORMot, I would like to do:
- Model = our existing ORM
- View = Mustache or AJAX / https://angularjs.org
- Controller = interface-based methods (implemented in Delphi or JavaScript)

The routing will take place between the View and the Controller, fully by convention, without any link to REST process itself.
IMHO we should not need to define CRUD operations of routing, just connect View and Controller in code, then the routing would be done automagically.

Offline

#6 2014-06-11 02:39:51

avista
Member
Registered: 2014-01-06
Posts: 63

Re: MVC URI routing

I still prefer the automated approach, as this is for developer consumption anyway.

I also think use of regular expressions is overkill and slow.  I initially tried that approach, but it's actually far more complicated than at first it seems.  URI templates are really not that complicated, as they essentially identify which URI path segments contain variables.  The parser I wrote handles all of these cases and is very fast.

Regarding Arnaud's proposal, to avoid the ambiguity with the following case:

GET 'customers/{CustomerId}/reports/orders/{OrderNumber}/details'

function get_reports_orders_details(CustomerID: integer; OrderNumber: RawUTF8): TServiceCustomAnswer;

Camel-case could be required to delineate segments that do not contain parameters:

GET 'customers/{CustomerId}/reports/orders/{OrderNumber}/details'

function get_reportsOrders_details(CustomerID: integer; OrderNumber: RawUTF8): TServiceCustomAnswer;

Another approach could be to use a predetermined numeric value (e.g., '0' - zero) to denote the parameters:

GET 'customers/{CustomerId}/reports/orders/{OrderNumber}/details'

function Get_0_Reports_Orders_0_Details(CustomerID: integer; OrderNumber: RawUTF8): TServiceCustomAnswer;

Which is IMHO *much* more readable.

Quite frankly, I want to spend as little time with configuration as possible, because I have too much work to do already.

So an implementation that just works 'automagically' as Arnaud says is a huge plus for me. smile

Last edited by avista (2014-06-11 02:47:08)

Offline

#7 2014-06-11 04:43:06

edwinsn
Member
Registered: 2010-07-02
Posts: 1,218

Re: MVC URI routing

Python's Flask has a dedicated example showing how to access the web server using jQuery, I WISH mORMot can provide similar easiness and similar example:

https://github.com/mitsuhiko/flask/blob … index.html

<script type=text/javascript>
  $(function() {
    var submit_form = function(e) {
      $.getJSON($SCRIPT_ROOT + '/_add_numbers', {
        a: $('input[name="a"]').val(),
        b: $('input[name="b"]').val()
      }, function(data) {
        $('#result').text(data.result);
        $('input[name=a]').focus().select();
      });
      return false;
    };
  });
</script>

Delphi XE4 Pro on Windows 7 64bit.
Lazarus trunk built with fpcupdelux on Windows with cross-compile for Linux 64bit.

Offline

#8 2014-06-11 19:46:24

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,612
Website

Re: MVC URI routing

You can use the very same example with mORMot.
smile

For AJAX samples, see e.g. "18 - AJAX ExtJS Grid" and "19 - AJAX ExtJS FishFacts".

Offline

#9 2014-06-12 01:50:00

edwinsn
Member
Registered: 2010-07-02
Posts: 1,218

Re: MVC URI routing

Great! I haven't used html front end yet, so didn't notice that!


Delphi XE4 Pro on Windows 7 64bit.
Lazarus trunk built with fpcupdelux on Windows with cross-compile for Linux 64bit.

Offline

#10 2014-06-22 20:47:29

avista
Member
Registered: 2014-01-06
Posts: 63

Re: MVC URI routing

Further to the 'convention over configuration' discussion, the method parameters could be used to determine if a URI segment is a variable or not:

GET 'customers/{CustomerId}/reports/orders/{OrderNumber}/details'

function Get_CustomerId_Reports_Orders_OrderNumber_Details(CustomerID: integer; OrderNumber: RawUTF8): TServiceCustomAnswer;

Example: 'customers/1234/reports/orders/5678/details'

So the'_' denotes a '/', and if the text between the segments matches a parameter as declared in the method, it would get parsed out.

Having said this, I think there is some argument to be made for using attributes, because they decouple the method/parameter name(s) from the URL used to call it.  That could be useful to prevent changes to the method from causing unexpected URI routing errors, and provides a lot of flexibility to present the URI to the consumer in any way they expect, without tying it explicitly to the implementation method name or parameters.

[WebGet('customers/{aCustomerId}/reports/orders/{aOrderNumber}/details?Filter={aDetailFilter}')]

function GetCustomerOrderDetails(aCustomerId: integer; aOrderNumber, aDetailFilter: RawUTF8): TServiceCustomAnswer;

As discussed previously, having access to the Context (if present as a parameter) would cover any case.  Also, if a '?*' was at the end, the system would not expect the options to be passed in a method parameter:

[WebGet('customers/{aCustomerId}/reports/orders/{aOrderNumber}/details?*')]

function GetCustomerOrderDetails(Ctxt: TSQLRestServerURIContext; aCustomerId: integer; aOrderNumber: RawUTF8): TServiceCustomAnswer;

That seems to cover all the bases, but I'm still interested to know more about how the MVC pattern that was proposed would work.

Thoughts? Comments?

Last edited by avista (2014-06-22 21:09:56)

Offline

#11 2014-06-24 09:14:51

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,612
Website

Re: MVC URI routing

AFAIK the context is already available, as part of ServiceContext.Request threadvar.

Yes, we may indeed need to support convention over configuration for most simple cases, then attributes or method-driven registration for other URI patterns.

Offline

#12 2014-07-08 04:19:01

avista
Member
Registered: 2014-01-06
Posts: 63

Re: MVC URI routing

When a service class instance is created in sicPerThread mode, is it safe to cache the context for subsequent use?

 aServer.ServiceRegister(TMyServiceApi, [TypeInfo(IMyServiceApi)], sicPerThread);

...

constructor TMyServiceApi.Create;
begin
  inherited;
  fContext := ServiceContext; <-----------------
end;

procedure TMyServiceApi.GetCustomer(out aCustomer: TCustomer);
var
  Param1: RawUTF8;
begin
  Param1 := fContext.Input['P1']; <--------------
  ...
end;

Or should the ServiceContext threadvar always be referenced directly when used?

Thanks

Last edited by avista (2014-07-08 04:19:54)

Offline

#13 2014-07-08 06:07:56

edwinsn
Member
Registered: 2010-07-02
Posts: 1,218

Re: MVC URI routing

Hi guys, I didn't dig deep into your discussions here, so please forgive me if what I'm posting here is irrelevant. So today I came across a web service that allows you creating a web API by uploading an Excel spreadsheet plus some point-and-click operations, very simple and cool, I'm wondering if this will give Arnaud some inspiration.

For example, I uploaded an spreadsheet like this:

Order No	Order Date		Product Id	License Key
1		Today			p01		abcd-efg
2		2014/7/15		p02		hijk-lmno
3		2014/7/16		p03		erty-oiuy

Clicked OK, and I got this https://sheetlabs.com/#/services/doc/INNO/test#examples


Delphi XE4 Pro on Windows 7 64bit.
Lazarus trunk built with fpcupdelux on Windows with cross-compile for Linux 64bit.

Offline

#14 2014-07-08 09:26:24

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,612
Website

Re: MVC URI routing

avista wrote:

When a service class instance is created in sicPerThread mode, is it safe to cache the context for subsequent use?

I suppose it is safe.
But the overhead of using a local variable, instead of a property, is IMHO negligeable.
And if you change later the mode from sicPerThread to another, your code won't break.

So, it sounds safer to me to use a local variable.

edwinsn wrote:

today I came across a web service that allows you creating a web API by uploading an Excel spreadsheet plus some point-and-click operations

It is in fact some nice REST-like requests.
The URIs sound not very deep, but concept is interesting.

Offline

#15 2015-09-17 13:35:07

SpanishBoy
Member
Registered: 2015-09-09
Posts: 3

Re: MVC URI routing

I'd like to use the routing as you mentioned above:

ICustomers = interface
  // for GET 'customers'
  function get_: TServiceCustomAnswer;
  // for GET 'customers/{CustomerId}'
  function get_(CustomerID: integer): TServiceCustomAnswer;
....

but it's not work for me. Can you please provide a real REST routing with interface approach?

Offline

#16 2016-01-27 18:52:56

mpv
Member
From: Ukraine
Registered: 2012-03-24
Posts: 1,570
Website

Re: MVC URI routing

I add most of  IANA HTTP methods to TSQLURIMethod
We need it to implement WebDAV/CalDAV protocols.
See [67bc72c07e]

Offline

#17 2016-03-11 05:45:47

alien
Member
Registered: 2016-03-11
Posts: 2

Re: MVC URI routing

Are there any news about URI routing? I want something like you described

  GET 'customers'
  GET 'customers/{CustomerId}'
  POST 'customers'
  DELETE 'customers/{CustomerId}'
  PUT 'customers'   
  GET 'customers/{CustomerId}/invoices/{InvoiceNumber}'
  POST 'customers/{CustomerId}/invoices'
  DELETE 'customers/{CustomerId}/invoices/{InvoiceNumber}'

and so on.
Is there any way to do it right now?

Offline

#18 2016-03-11 06:16:43

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,612
Website

Re: MVC URI routing

You can do it using method based services...

Offline

#19 2016-03-11 08:02:15

alien
Member
Registered: 2016-03-11
Posts: 2

Re: MVC URI routing

Thanks a lot. I'll use it. But are you planning to implement ideas from this topic?

Offline

#20 2016-03-12 09:05:20

emk
Member
Registered: 2013-10-24
Posts: 96

Re: MVC URI routing

I would also like to implement a REST API for our Invoice/Orders/etc.. Can someone please post a code example how to implement thru method based services the processing of:

  GET 'customers'
  GET 'customers/{CustomerId}'
  POST 'customers'
  DELETE 'customers/{CustomerId}'
  PUT 'customers'   
  GET 'customers/{CustomerId}/invoices/{InvoiceNumber}'
  POST 'customers/{CustomerId}/invoices'
  DELETE 'customers/{CustomerId}/invoices/{InvoiceNumber}'

Thank you.

Offline

#21 2016-03-12 15:53:03

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,612
Website

Re: MVC URI routing

Take a look to the doc about method based services and the associated samples.

Offline

#22 2016-03-12 18:12:05

emk
Member
Registered: 2013-10-24
Posts: 96

Re: MVC URI routing

Please write a snippet of code because I didn't find in samples.

Offline

#23 2016-12-13 06:27:54

Stasonych
Member
Registered: 2016-11-25
Posts: 8

Re: MVC URI routing

Hello!
A very interesting topic. Can write a snippet or describe here how to use the examples? It is not clear where then used interface ICustomers. Is it possible to use the URI routing in my MVC application to mORMot. Sorry if asking stupid questions but I'm new.
I have not seen this implementation in the documentation and examples. Thanks in advance!

Offline

#24 2022-05-11 09:06:20

squirrel
Member
Registered: 2015-08-13
Posts: 155

Re: MVC URI routing

Is it currently possible to do for example

GET 'customers/{CustomerId}/invoices/{InvoiceNumber}'
or
POST /root/Calculator/Add/1/2

using interface based services?

Last edited by squirrel (2022-05-11 09:06:37)

Offline

#25 2022-05-11 09:32:17

ttomas
Member
Registered: 2013-03-08
Posts: 135

Re: MVC URI routing

Not possible in interface based service.
Workaround will be to create method based service, manually parse URI after root and call interface in method implementation.

Offline

#26 2022-05-11 11:58:58

squirrel
Member
Registered: 2015-08-13
Posts: 155

Re: MVC URI routing

How would I then find and execute the correct function on that interface with the correct parameters?  I assume I'll have to search for the methodindex from the interfacefactory and then step through and assign the declared parameters?
Have someone done something like this before?

Since ExecuteCommand is private, how would the function be called after the parameters are assigned?

Last edited by squirrel (2022-05-11 12:15:45)

Offline

#27 2022-05-11 12:44:11

igors233
Member
Registered: 2012-09-10
Posts: 241

Re: MVC URI routing

Do you control client? Interface based is fine but you have to pass params as arguments to function so it's a bit different than method based where you pass it via URL/URI

Offline

#28 2022-05-11 12:48:44

squirrel
Member
Registered: 2015-08-13
Posts: 155

Re: MVC URI routing

I need to temporarily put something in place of a Datasnap server that third parties integrated to.  So what is important, is that I maintain exactly the same uri formats.  Unfortunately that means that third party clients over which I have no control, need to be able to make POST requests such as /root/Calculator/Add/1/2 which I need to translate to the registered interface functions, ie to ICalculator.Add(1, 2) and execute it.

Offline

#29 2022-05-12 08:16:09

pvn0
Member
From: Slovenia
Registered: 2018-02-12
Posts: 211

Re: MVC URI routing

squirrel wrote:

How would I then find and execute the correct function on that interface with the correct parameters?  I assume I'll have to search for the methodindex from the interfacefactory and then step through and assign the declared parameters?
Have someone done something like this before?

Since ExecuteCommand is private, how would the function be called after the parameters are assigned?

AFAIK it's already documented on how to call interface based services on server side : https://synopse.info/files/html/Synopse … #TITLE_421

Offline

#30 2022-05-12 09:57:57

squirrel
Member
Registered: 2015-08-13
Posts: 155

Re: MVC URI routing

I have done something similar to the documentation, but it looks as if all requests are then executed sequentially.  I created a method that executes the functions like this

  if Services['Calculator'].Get(svr) then
    if SameText(req.FunctionName, 'Add') then
      Ctxt.Returns(svr.Add(1, 2))

To come to that conclusion, I did something like this in Add:

...
  StartTime := now;
  Sleep(5000);
  StopTime := now;
  Result := '{"function": "Add", "StartTime": "' + DateTimeToStr(StartTime) + '", "StopTime": "' + DateTimeToStr(StopTime) + '"}';
..

When I open 2 browsers and call the above method at almost the same time, the results indicate that they are executed one after the other:

browser1: {"function": "Add", "StartTime": "2022/05/12 11:26:56", "StopTime": "2022/05/12 11:27:01"}
browser2: {"function": "Add", "StartTime": "2022/05/12 11:27:01", "StopTime": "2022/05/12 11:27:06"}

Is this the expected behaviour, or am I doing something wrong?  The interface was declared with sicShared, but the same effect is seen when using sicPerThread or sicSingle .

Offline

#31 2022-05-12 10:21:16

ab
Administrator
From: France
Registered: 2010-06-21
Posts: 14,612
Website

Re: MVC URI routing

I don't understand what you did on server side.
Method-based services are never serialized.
Interface-based services are not serialized by default.

Edit:
I just made some tests, and two FireFox instances actually do serialize the connections, whereas plain curl do not. I don't know why.
So the serialization seems to be on the client side.

$ curl http://localhost:11111/root/example/delay
{"result":["start=2022-05-12 10:29:32 stop=2022-05-12 10:29:37"]}
$ curl http://localhost:11111/root/example/delay
{"result":["start=2022-05-12 10:29:33 stop=2022-05-12 10:29:38"]}

Offline

#32 2022-05-12 10:35:26

squirrel
Member
Registered: 2015-08-13
Posts: 155

Re: MVC URI routing

32 threads

Maybe this is a browser issue and not a framework issue.  It happens when I test using two tabs of the same browser, but not when using two different browsers at the same time, such as chrome and firefox.

Offline

#33 2022-05-12 11:21:08

pvn0
Member
From: Slovenia
Registered: 2018-02-12
Posts: 211

Re: MVC URI routing

Just a wild guess,
I assume your browser test is using a GET request, you should make a POST request instead. From the browsers perspective you're trying to access a cacheable resource, there's no reason to send a second request for the same resource if the first one is still waiting for server response. Either POST request or append a different parameter(Y) to the GET request for each X /root/example/delay?X=Y.

Offline

#34 2022-05-12 11:26:04

squirrel
Member
Registered: 2015-08-13
Posts: 155

Re: MVC URI routing

Yes, that is probably it.  Maybe its a browser issue.  I wont worry too much about that now.

Offline

Board footer

Powered by FluxBB